Transponder And Remote Controls Programming Manual Vehicles Models.

🔑🔑 Transponder and remote controls programming manual models All Brand Car

👉 Including key programming, chip recognition, key duplication, proximity remote control, key origin of factory, aftermarket keys, and more, listed by manufacturer, model, and year for easy lookup.

👉SETTING THE CONTROLS: Get all controls can be programmed up to 3 controls. 

👉Turn the ignition ON. 

👉Point the remote at the lock control module located under the glovebox. 

👉Remove the key IMMOBILIZER PROGRAMMING. The immobilizer can only be programmed with diagnostic equipment. You can program up to 6 keys programmed.

👉CONTROL PROGRAMMING • From the contact using the key that has no command • Lock the driver's door manually with the key 

👉The system will give you thirty seconds to carry out the programming of each of the keys 

👉Before 5 seconds have elapsed, press the "Unlock" button to confirm the position memory 1.

👉The direction indicators flash once to indicate that the signal has been received 

👉Remove contact  

👉The vehicle is unlocked and the programming mode is disabled and can remove the key. • Always remove the contact between the programming procedures keys

👉The doors will lock and unlock to confirm programming. CONTROL PROGRAMMING Get all vehicle controls. • Access to the data connector located below the steering.